Rovertech 2.0

d1ng27

Just measured both inlet and outlet and it's 3" both ends. Well god damn as near as you can get to 3"

d1ng27

No longer need this after selling my 1.8T which was going in my metro GTi. Two pumps, the one on the left came with it when I bought it, and the one on the right is a focus RS pump I bought. Open to offers before I ebay the thing. Located Sunny south wales http://i229.photobucket.com/albums/ee27/Ife...

d1ng27

Just sold the block to a mate, so have a 1.8 Turbo charger with manifold and downpipe sitting here doing nothing now.
There's no play in it at all and no good to me.

100? before I ebay/gumtree it

d1ng27

Tony, I'll send you some pics tomorrow afternoon..

d1ng27

Would anyone be interested in a K-series 1.8 turbo engine and charge cooler kit? Engines done 87K but I've never heard it running. :lol: Bought it from a breakers from a rear ended 75, and it came with a 3 month warranty but that was about 18 months ago and been sat in my basement since. No play on ...

d1ng27

I've said in the post that it isn't mine

I'm in sunny south wales and drive something a lot better than that

d1ng27

I have a couple of these if cableguy has no joy

d1ng27

djwilma wrote:Also interested in the loom

How much ?

A tenner more than he wants, for him to give to me for you're gearbox

d1ng27

Just found this on ebay, but isn't mine..

http://www.ebay.co.uk/itm/Rover-200-Vi- ... 27e46a1817

d1ng27

How much you want for the loom and maybe the ECU?

d1ng27

I hope he aint got one yet as I've just picked up a box for him and paid out my pocket

d1ng27

Bang it on ebay with lotus in the title and you'll get good money for it.
No doubt people will offer you 50quid and say they aren't worth much if you don't know

d1ng27

When I first had my metro I lent it to the missus, and she burnt the clutch out. So I fitted a new clutch kit, hopped in the car and spotted the thrust bearing sitting up on the scuttle panel

So had to split the box again to fit the fooker

d1ng27

Isn't the best place to advertise here with it being for T-series, but I have a set of 135 cams for sale out of a TF135.
Ideal for the ones with a 1.4 K-series

Ideally after 100 plus post? Or make a sensible offer

d1ng27

This is one of them, but there's quite a few more. I've found what I wanted to know now thanks to MgJohn, but everytime I got this my nut went

http://www.rt2468abcd.r8technology.co.uk/viewtopi ... 1&t=116718

d1ng27

Didn't know where to put this, but after googling a few thing's I get links to this site. Clicking on them to view the threads, but getting 'not authourised to visit thread/site.

Any ideas why? Trying to find info on 5th gear on a pg1 box

d1ng27

I weighed in a metro cat about 4 weeks back and got 35quid for it.

Or bang them on ebay as scrap and see what they fetch. I've seen scrap cats go for more on ebay than the price you'll get at the scrappies

d1ng27

I've got a new one sitting in the car, but you can buy them on their own. I bought this one from autoparts for about 15quid i think

d1ng27

Tong, I've seen this Ti and I put a new clutch on it not that long ago, it's a nice one.
Better than your golf

If you want to go have a look let me know and I'll pop you down to him. Don't go thinking you'll beat my metro in it though

d1ng27

Not having a pop, but are you really an enthusiast or just buy these motors to make money?
Every motor you get you strip due to wanting to much work doing to them.

d1ng27

Actually the clarke EN90 isnt a bad welder if your just doing body work. Anything over 3mil and its logger, and doesnt give enough penetration for a good weld. Should get one on ebay for around a tonne. All depends what you want it for. The ones that pop into lidls or aldis are logger on bodywork, b...

d1ng27

I dont know fuckall, and dont really care either way about all of this, but i was watching a programme the other week about imigrants, and they were saying that if they get turned down to be a uk citizen and become illegal, they can still claim benefits. That's what they want to sort out. Your not m...

d1ng27

If you answerd your pm's you may have sold more parts from this.

I'll find them else where

d1ng27

I had my left index finger last week cutting up sheet metal to weld the metro. No gloves

but lucky enough it wasn't spinning flat out. Nice wide fairly deep slice about an inch long. Fooking hurt!

My fault though as i removed the gaurd on the grinder

d1ng27

d1ng27

Unbeatable at any game

d1ng27

Dont start crying again lad. You know i dont give a logger who sells what or where they sell it.
I was waiting for Dai or power happy Morey to have a pop.

But take it which ever way you want

d1ng27

If it's a genuin original cat they pay around 35-45 quid. If it's an aftermarket cat they pay 2quid.
I've weighed in loads.

d1ng27

My father inlaw is tinky winky useless at roundabouts. Never knows what lane to get in so he uses up 2 by sitting over the white line whatever. Goes around the roundabout and drifts all over the tinky winky place. :o I had some bloke blast his horn and give me the fingers the other day on one. I cam...

d1ng27

Crazygary has a modded pulsar fmic going cheap.

d1ng27

d1ng27

black op's, mw3, GT5. Got more games but never play them

d1ng27

Use my metro GTi every day. Car's are there to be driven, not tucked up in a garage doing nothing imo.

d1ng27

http://i869.photobucket.com/albums/ab256/G-baby158/IMG_0065.jpg http://i869.photobucket.com/albums/ab256/G-baby158/IMG_0066.jpg http://i869.photobucket.com/albums/ab256/G-baby158/IMG_0067.jpg http://i869.photobucket.com/albums/ab256/G-baby158/IMG_0076.jpg http://i869.photobucket.com/albums/ab256/G-...

d1ng27

Are you kidding? Youve uprated your brakes, and probably the suspension, and a lot of other things. He has an spi softtop. The metro is the cheapest, tinniest, crappest most unsafe car i've ever been in. Should you ever, ever have a smash in one, and i get the impression from the above theres a hig...

d1ng27

Cheap as chips. http://www.amazon.co.uk/gp/offer-listin ... tag=vig-21

Some footage here, and looks good qaulity

Scroll down the page

http://forums.mg-rover.org/showthread.php?t=489279

d1ng27

To be fair, chris isnt the best driver, and can just about handle the 70 odd ponies he already has.
He's gonna need a cage or something with 160 ponies under his mashed up bonnet

Rovertech 2.0

Search found 124 matches

Re: Pace charge cooler

Pace charge cooler

K-series 1.8 Turbo charger

Re: K-Series 1.8 Turbo engine and charge cooler kit

K-Series 1.8 Turbo engine and charge cooler kit

Re: decent zr turbo need a toy or coupe or gsi turbo

Re: selector forks and other parts with it

Re: Breaking 1.8turbo conversion, ZandF ecu, LSD gearbox ect

Re: decent zr turbo need a toy or coupe or gsi turbo

Re: Breaking 1.8turbo conversion, ZandF ecu, LSD gearbox ect

Re: PG1 Gearbox wanted

Re: BRM close ratio gearbox

Re: Worst (most retarded) mistake working on a car??

TF 135 Cams

Re: Not authourised to view threads

Not authourised to view threads

Re: Scrapping cats

Re: Clutch release bearing

Re: t16 turbo in south wales area ???

Re: Breaking; 2004 (54) MK2 MG ZS TD 115..

Re: welders and grinders

Re: Petition for IDS to live on £53 a week for a year

Re: 1993 (K) Rover Metro 1.1 Nightfire Red..

Re: Let this be a lesson to you ~ It was to me.

Re: Playstation Network Gamer ID

Re: Rover 100 VVC

Re: Catalytic converter's for Cash

Re: Roundabout rules. Have they changed?

Re: inter-cooler and pipes wanted

Re: PS3 owners - What do you play online? (list)

Re: Who runs their MG-R as a daily?

Re: rover 114 cabriolet vvc

Re: rover 114 cabriolet vvc

Re: Need a dash cam

Re: rover 114 cabriolet vvc