Rovertech 2.0

Yes, I found pinout table for 75/ZT in which says that Pin 22 is Power Assisted Steering load/presure sensor/switch and actualy found inconsistency for diagram and table on this PAS topic.

In case of Freelander table also says pin 22 not used.

In case of my diagrams for 75/ZT it says pin 22 is not used, except in case of 45/ZS when it is connected to immobilisation ECU when pin 52 is not used. Interesting... the pin out documents I have also say for 75/ZT it's pin 52 and pin 22 is PAS switch... PAS as Power Steering? Even on Freelander pi...

Then I stand corrected in my assumption and ZS diagrams seems fine. Odd to see this difference, but seems it is. In regard to MEMS2 it is used in R800 with KV6 engine too, so I am not surprised. To me it would be normal that same ECU is happy for immo signal from either 5AS or Pektron. Am I missing ...

Hi Philip, I was intrigued with conflicting info I found this morning in more then 6 different documents. Because of that I digged deeper on this problem and compared information in Freelander ECU diagrams for KV6 engine. In each one of them for MY2001 to MY2004 EMS2000 ECU pin for immobilisation is...

I checked in my diagrams and that are at least 3 different ones.

In each case for KV6 Engine Management System in ZS pin for communication to Alarm ECU, 5AS or BCU is pin 22.

Also in each case for KV6 Engine Management Sytem in ZT and ZTT pin for communication to Alarm immobilization ECU is pin 52.

Marty wrote:...
If you do not plan on going 100% don't even bother to comment and say you going as it's unfair on the guys organising it it's there time and effort being wasted which is unfair..

Just a note that I bought my plane tickets, paid for hotel, so on April 14th I will be in Longbridge attending PoL

I am considering to fly from Croatia to Blrmingham in order to attend PoL 2018, so I would like to see if there are any moments on this topic from side of RoverTech and members?

They gradualy started to block links to users pictures. Mine were fine until two days ago. Now I am blocked too as you can see from my avatar. Soon all might be blocked as thay changed their Terms of Service sneaky overnight and demanding $400 per year from any user to continue using them. This is e...

Well I have my Rover 600 from 2001 so it would be 16 years now. I am second owner and she was 5 and a half years old when I got her.
Rover 200 we have from 2004 so it is 13 years now, we are second owner as well.

I am interested if it is possible to adjust number of miles/kilometers on odometer when changing instrument cluster, as I would like to put the same number on new cluster?

...
From my point of view you should programm it in your pscan as that would be great...

pscan.eu wrote:I thought that the Pektron was only fitted on the last MGF, 25 and 45. I was imagining that the 75 would have a BMW based system.

Rover 75 certanly does not have the same Pektron box as the rest of MGR models.

I am intrigued with this question. What you ment with Immobiliser learning mode?
Do you ment if MEMS3 can be paired with Pektron ECU? If so, I do not think that this is available in pscan, but might be very soon.

Well I am active, but unable to attend, due to striking difference in distance...

The new keyfob needs to be of the same type (as in 3TXA or 3TXB) as the old one, or it won't work. Apart from that simply follow the on screen instructions. I am little surprised. Isn't it other way round? There are two types of 5AS boxes. First one with only one connector and second revision with ...

Yes I have a Pektron unit from a V6 45. The next challenge is get it to power up on the bench. I hope this unit is not armed as othervise I do not think you will be able to speak with it. Did you took multiplugs with pigtails of wire as it would be much easier that way? I wonder if you have pinout ...

I just wondered, because I am interested, if you have plans to add Rover 600 and Rover 800 alarm boxes among ones pscan.eu can read and program?

In town where I live you have a lot of exquisite scenery you can use for car shots. Here you can get the idea what I am talking about, note that these are not my pictures, but you can see:

1) http://forums.mg-rover.org/showthread.php?t=580505

2) http://forums.mg-rover.org/showthread.php?t=496210

Has anybody tried application on Windows Phone 8.1?

I can imagine that Pektron capabilities are significant amount of work, but this is valuable add on to have. I am really considering buying it, and I would love to have all in one place. Will you reconsider on this topic? One more question - do your application work on Win 8.1 which can be found on ...

Thank you for info.

At this moment I am asking for information, so I am not the one to buy this one last unit.
I will consider it for later, and follow on the progress you have.

Is the price still the same, and what is included in package we will get for the price?

One more thing - is there any other way of paying like paypal, as bank money transfer adds significant cost when paying fom other EU countries.

As title says I am interested in wood finish door card handles for all 4 doors, for R25.
If anyone has set in good condition for sale, let me know?

John, I saw your post on .org and read what you said. Some time after I was so surprised to see how many replies there were. I started reading and could not beleive what was written. And while I was reading last post and clicked on refresh thread was gone. I really could not see anything problematic...

Welcome to my feedback thread

Gangnam Style

ROVER-25X wrote:3 Weeks to go, time flys and all that !

What, you are getting nervous and all that?