T-16 ZR Breaking

[nickc09]

Right I have come to the point where I can not justify spending anything more on my car so she is getting broke, after nearly 4 years of ownership and a hell of a lot of money this is how it stands…

i have priced these as what i deem very reasonable and will not take any less than the list price, sorry

for all you people who i provisionally sold stuff to, get your cash out lol 

Pictures available on request and have lots of pics of the build and the life of the car

in manchester M46 postcode

all prices do not include postage sorry,

heres the list.......

MG ZR 160 T-series Turbo Breaking, 




trophy yellow paint code FAR

Front bumper with fogs £40 SOLD

Zorstec single piece intercooler kit including samco elbow from turbo £300 

alloy Radiator needs £20 worth of welding, done less than 100 miles £80 

Yellow samco coolant hoses £80 SOLD

Stainless coolant pipes £80 

manifold with external wastegate £70 SOLD

T28 pulsar turbo with wastegate welded up £230 (or £270 with manifold) SOLD

620ti forged engine with 220 ancillaries JE pistons, ported, polished and gasflowed head with cams, klinger hedgasket & arp headbolts £800
only done 1000 miles on new bottom end 
Will split the bottom end with enough interest….. (600 for bottom end, £150 for top end and £60 for ARP's) SOLD

Throttle body £15 SOLD

Inlet with injectors £30 SOLD

Gearbox £70

Borg and Beck clutch, less than 800 miles £70

Used AP clutch (still quite a bit left on it) and standard flywheel (slightly dished) £35 SOLD

driveshafts £20 each SOLD

engine mounts £30 (front side and dogbones, no rear) SOLD

magnacore 10mm HT leads £50 

spark plug cover £15 (SOLD)

fuel pressure regulator, never used £10 (SOLD)

brand new clutch cable £15

282mm front calipers with black diamond discs and mintex pads £80 (SOLD)

160 rear beam with black diamond discs and mintex pads £100 (SOLD)

external in line fuel pump £20

side mount stabilizer bar £30 

220 turbo/zr engine loom already converted by aa autosport £70 

960 4gap ECU & 5as with fob £50

koni shocks and springs front and rear £80 SOLD

Chrome strut brace £50 (SOLD)

Addendum alloy wheels in black and yellow, good tyres all round £280 (1 sanded for respray) 

front and rear 220 subframes £40

walbro in tank fuel pump £30 (with fuel tank £50)

half leather yellow monaco interior £80 SOLD

zr 160 clocks with 64k on £15
 
zr 160 clocks with 25K on £20 SOLD

steering wheel & airbag £30

MK1 Dash & centre console £35

Mk2 dash and centre console £85 SOLD

220 Armrest £30 (cut slightly at front for fitment with mk2 dash) SOLD

pillar dual pod £15

Collins boost gauge £20

type r oil temp gauge and sender £20

all black roof lining, interior light, sunvisors & pillars £30 

doorcards front and rear (3 door) £20 SOLD

carpet £10

mk2 boot and rear bumper with half carbon fibre wrapped spoiler £140 SOLD

Xpower arch extention kit £50 SOLD

tinted rear quarter windows £20 SOLD

sideskirts & endcaps £40 SOLD

doors £20 each

Wings £25 (1 dented)

bonnet £20

wing mirrors £35 for pair or £20 each

wind deflectors £10 SOLD

T28 oil feed and return £30 

1 rspec manual boost controller £15 

1 Powertek boost controller £10

turbo return pipe £15

620ti mounts for ancillaries and side mount (bits that bolt to the block) £10

lots more bits just message for info

[jambon13]

what are the mounts like?one of mine has split?

[Deckz]

Send me pics off the alloy rad please.

[mike88]

I'll have the wind thingys.

PM me details

[nickc09]

I'll have the wind thingys.

PM me details

someone beat u to it buddy lol, will let you know if it falls through

[mike88]

Told you I wanted them last time you was "breaking"

[nickc09]

Told you I wanted them last time you was "breaking"

i know, but the guy who got there before you last time got ther ebefore you this time too lol, sorry buddy

[_BILLY_ZR_]

where are you located bud ?

[nickc09]

where are you located bud ?

Manchester/Wigan way, right near ZR chris, but can bring bits to POL if needed?

[_BILLY_ZR_]

where are you located bud ?

Manchester/Wigan way, right near ZR chris, but can bring bits to POL if needed?

could you bring these to POL

all black roof lining, interior light, sunvisors & pillars £30


any pics in the mean time would be great, did you die/spray them ?

also do you have a non split rear engine mount ?

hows the boots on the driveshaft?

and wat cams are in the head if you do split ?

[nickc09]

where are you located bud ?

Manchester/Wigan way, right near ZR chris, but can bring bits to POL if needed?

could you bring these to POL

all black roof lining, interior light, sunvisors & pillars £30


any pics in the mean time would be great, did you die/spray them ?

also do you have a non split rear engine mount ?

hows the boots on the driveshaft?

and wat cams are in the head if you do split ?

all sprayed mate, roof lining looks slightly cloudy out the car but bang on when in, will get pics tomorrow, i was running a solid rear mount so no sorry, and driveshafts are bang on, as for the head it will be going as a full head, already got 2 takers so looks like that will be sold pal sorry

will bring these down to pol for you

[_BILLY_ZR_]

ok pics needed of ur rear engine mount then too hahaha


will prob take the drive shafts of ya if they look good at POL

[nickc09]

ok pics needed of ur rear engine mount then too hahaha


will prob take the drive shafts of ya if they look good at POL

lol rear engine mount is just standard mount with box section in it instead, bolted through to hold the original thread in, looks pants but did the job perfectly, u can have it if u want it, quite a bit of vibration through it though... lol

[zrchris]

evering thing but engine and box will be at pol ! we will fill my car nice and have a jumble sale lol

[nickc09]

evering thing but engine and box will be at pol ! we will fill my car nice and have a jumble sale lol

THIS^^^^^ Lmao

[nickc09]

can get pictures of all parts if needed, just ask and thou shalt recieve lol

[nickc09]

ok pics needed of ur rear engine mount then too hahaha


will prob take the drive shafts of ya if they look good at POL

just to let you know billy there was a pillar mounted boost gauge and oil temp so there are a couple of holes in the drivers pillar, unless u want the dual pod with it? u can have it for a 10er?

[joshreynolds]

ok pics needed of ur rear engine mount then too hahaha


will prob take the drive shafts of ya if they look good at POL

just to let you know billy there was a pillar mounted boost gauge and oil temp so there are a couple of holes in the drivers pillar, unless u want the dual pod with it? u can have it for a 10er?

If not I'll have the gauges when I come up tomora
Josh

[nickc09]

ok pics needed of ur rear engine mount then too hahaha


will prob take the drive shafts of ya if they look good at POL

just to let you know billy there was a pillar mounted boost gauge and oil temp so there are a couple of holes in the drivers pillar, unless u want the dual pod with it? u can have it for a 10er?

If not I'll have the gauges when I come up tomora
Josh

no worries josh, still not got a time of when im going to be there, looks like it will be around 11 if thats ok?

[joshreynolds]

ok pics needed of ur rear engine mount then too hahaha


will prob take the drive shafts of ya if they look good at POL

just to let you know billy there was a pillar mounted boost gauge and oil temp so there are a couple of holes in the drivers pillar, unless u want the dual pod with it? u can have it for a 10er?

If not I'll have the gauges when I come up tomora
Josh

no worries josh, still not got a time of when im going to be there, looks like it will be around 11 if thats ok?

No probs I'll sit in the van with me laptop and do my paperwork while I'm waiting
Josh

[nickc09]

THE BREAKING HAS BEGUN PEOPLE,

People who want to collect bits let me know what u want and when you are coming and i will get them off asap

[chiefgilray]

What about the gearbox? Mileage, condition, steal caged?
Would you be willing to courier it to Aberdeen?

Thanks

[nickc09]

What about the gearbox? Mileage, condition, steal caged?
Would you be willing to courier it to Aberdeen?

Thanks

gearbox is in good condition, no steel caged bearings and mileage unknown sorry buddy

as for the courier depends on cost buddy

[Deckz]

Let me know when you have those pics please mate.

[nickc09]

Let me know when you have those pics please mate.

will be getting the turbo and everything out today so will have them by 5 o clock buddy

[nickc09]

[cochapman]

What's the suspension like? Which Koni set up is it? Adjustable or fixed and how much drop does it have?

Ta

[nickc09]

What's the suspension like? Which Koni set up is it? Adjustable or fixed and how much drop does it have?

Ta

not sure of the actual shocks mate but dropped my car about 40/50mm, non adjustable, front koni shocks and springs with zr160 rear shocks and koni springs, handled really well, will be getting the struts off today hopefully so will try and get some pics

[cochapman]

Pics of the shocks would be good, but thats too much drop for what I need, so probably not interested in the springs.

[nickc09]

Ok so not too bad at POL, few bits left though so if u want, just ask

[garry_noble]

all black roof lining, interior light, sunvisors & pillars £30 

Got any pics and how much u reckon postsge be to surrey londOn

[adamgreenmgturb]

pm,d

[nickc09]

all black roof lining, interior light, sunvisors & pillars £30 

Got any pics and how much u reckon postsge be to surrey londOn

now £40 with the dual pillar pod ans there are holes for it so may aswell leave it on....

as for postage i can find out buddy

[garry_noble]

Defo interested awaiting prices

[Hayleyb]

Do you still have the boost gauge if so can i have a picture please?

Thanks