vitesse coupe breaking thread, some cool parts

[james1978]

well ill take provisionals on things for if no one bothers to save what is a cool car, and would be a monster!!

if no one takes stuff it will be ebayed so grab what you need quick


STANDARD T25 TURBO - NO PLAY SMOKE ETC VERY GOOD TURBO - £80

IVE GOT SOMEONE ON FIRST DIBS FOR ALMOST NEW- LARGE FMIC , PIPEWORK , SILICONE FITTINGS AND CLIPS - £180

AIR CON PUMP £30

POWER STEERING/ WATER PUMP - £30

EXELENT RUNNING ENGINE, NO LEAKS, NO SMOKE ETC ETC -£ 150

BRAND NEW 285MM DISKS AND PADS WITH ACCORD CALIPERS AND MOUNTS TO FIT THE ABOVE £ 80

BRAIDED BRAKE LINES £30

GEARBOX EXCELENT WORKING ORDER IF IM CORRECT SHOULD BE TYPE B TORSEN £150

BODY PANELS IN BRG???????????

FULL CREAM LEATHER INTERIOR - FRONT ELECTRIC AND HEATED SEATS IN WORKING ORDER £200

17" VITESSE ALLOY WHEELS IN GOOD CONDITION TIRES A LITTLE LOW - £200

MILD RE PROFILED CAMS £50

ANYTHING ELSE LET ME KNOW TA

[420gazza]

dibs on the manifold and downpipe

yhpm

[RobTi]

BRAND NEW 285MM DISKS AND PADS WITH ACCORD CALIPERS AND MOUNTS TO FIT THE ABOVE £ 80

BRAIDED BRAKE LINES £30
!st dibs on these after some more info on them please

brake lines make and how long fitted also what disks and pads and were they fitted to the vitty for how many miles ( accord callipers definatley work)
Thanks
Robert

[220 tubz]

well ill take provisionals on things for if no one bothers to save what is a cool car, and would be a monster!!

if no one takes stuff it will be ebayed so grab what you need quick



TUBULAR MANIFOLD AND DOWNPIPE - £100 bought of one of the many gaz's off here!!

STANDARD T25 TURBO - NO PLAY SMOKE ETC VERY GOOD TURBO - £80

IVE GOT SOMEONE ON FIRST DIBS FOR ALMOST NEW- LARGE FMIC , PIPEWORK , SILICONE FITTINGS AND CLIPS - £180

AIR CON PUMP £30

POWER STEERING/ WATER PUMP - £30

EXELENT RUNNING ENGINE, NO LEAKS, NO SMOKE ETC ETC -£ 150

BRAND NEW 285MM DISKS AND PADS WITH ACCORD CALIPERS AND MOUNTS TO FIT THE ABOVE £ 80

BRAIDED BRAKE LINES £30

GEARBOX EXCELENT WORKING ORDER IF IM CORRECT SHOULD BE TYPE B TORSEN £150

BODY PANELS IN BRG???????????

FULL CREAM LEATHER INTERIOR - FRONT ELECTRIC AND HEATED SEATS IN WORKING ORDER £200

17" VITESSE ALLOY WHEELS IN GOOD CONDITION TIRES A LITTLE LOW - £200

MILD RE PROFILED CAMS £50

ANYTHING ELSE LET ME KNOW TA

if the person on downpipe drops out illtake it

[TheRealStig]

Been told the manifold wont fit a coupe

[jaguar82]

What do you mean by that "MILD RE PROFILED CAMS £50"?

Is this standard cams or with larger lift/duration?

[dodge]

dont suppose you got a forge bolt on dump valve???

[matt077]

can i be added to the list for the TUBULAR MANIFOLD AND DOWNPIPE

[daz500]

Is it this manifold?

[TheRealStig]

Let one of the other guys have it james, iv been told it wont fit a coupe mate

cheers

[james1978]

Is it this manifold?

yes indeed its that one!!! but with the longer downpipe which fits any standard exaust flanged turbo, ie t25 / 28
its a cracking piece of kit

who wants it then, in order of who asked for dibs first

dont suppose you got a forge bolt on dump valve???

sorry no

What do you mean by that "MILD RE PROFILED CAMS £50"?

Is this standard cams or with larger lift/duration?

i bought them as mild reprofiled cams, as in profiled for longer duration , i cant be exact or specific, thats why they are so cheap, check prices for piper cams, and bear in mind all cams for t16 engine, are reprofiled, as no one does manufactured ones out of the box!!!

BRAND NEW 285MM DISKS AND PADS WITH ACCORD CALIPERS AND MOUNTS TO FIT THE ABOVE £ 80

BRAIDED BRAKE LINES £30
!st dibs on these after some more info on them please

brake lines make and how long fitted also what disks and pads and were they fitted to the vitty for how many miles ( accord callipers definatley work)
Thanks
Robert

not sure what make, but they are well made items, all lines, disks, and pads are BRAND NEW!!!!! the accord calipers and mounts are obviously second hand, and i have been told they will fit work fine!! they are cheap too!!!

Been told the manifold wont fit a coupe

sorry yes the manifold is for 600 / 800 only

[Cableguy]

Anybody any ideas what the manifold fouls and if its possible for it to fit a 200 with a few mods ?

[daz500]

The manifold and downpipes were mine but the downpipe originally belonged to GeraintUK when he had it fitted to his 620. As far as I know it will fit the 600/800 ok but not the 200 (i could be wrong though). Only things needed were slim fans, an oil drain (pirtek did mine), an oil feed made and a screamer pipe for the EWG (if used).

I know it's a cracking bit of kit ... cost me a small fortune and I practically gave it away on ebay Pitty you never got it installed.

[420gazza]

Let one of the other guys have it james, iv been told it wont fit a coupe mate

cheers

i had first dibs anyway, can you not read the thread

i'm gonna leave it james if it wont fit a 200 as i was planning on fitting it to a bubble anyway

[james1978]

sell the bubble and buy a propper car like an 820 coupe

Let one of the other guys have it james, iv been told it wont fit a coupe mate

cheers

i had first dibs anyway, can you not read the thread

i'm gonna leave it james if it wont fit a 200 as i was planning on fitting it to a bubble anyway

he had pm,d me almost as soon as the thread went up so had first dibs, but hey ho, none of you are man enough to fit it to a bubble lol!!

The manifold and downpipes were mine but the downpipe originally belonged to GeraintUK when he had it fitted to his 620. As far as I know it will fit the 600/800 ok but not the 200 (i could be wrong though). Only things needed were slim fans, an oil drain (pirtek did mine), an oil feed made and a screamer pipe for the EWG (if used).

i have a feeling nothing will sell or enough of it, so ill end up keeping and fitting it, but really dont wana have to transport it all half way across the country to somewhere where ive not really got the room for it!!!

someone buy the whole thing and build it!!!

would have a car that has it all, and would be a cracking sleeper

I know it's a cracking bit of kit ... cost me a small fortune and I practically gave it away on ebay Pitty you never got it installed.

[james1978]

o i can arrange transport for the whole project to anywhere in the country!!!

[TheRealStig]

Let one of the other guys have it james, iv been told it wont fit a coupe mate

cheers

i had first dibs anyway, can you not read the thread

i'm gonna leave it james if it wont fit a 200 as i was planning on fitting it to a bubble anyway

what you on about mate? i was offered it before it was put on this thread and was told it was mine first if i wanted it, but it wont fit.......