T16 goodies

[Turbo-Rush]

i gathered together a vast list of parts for my hi spec Ti build but change of plans and a new scooby means it won't get built after all so here goes with the list will add bits as i remember them...

220 coupe engine with M-series rods and pistons, klinger hg, new water pump and cambelt complete and ready to fit £300
(seen the rods and pistons alone go on here for £275) collection only on this really deposit taken

type B steel caged box £150 can courier

M-series lower and upper inlet manifold (polished upper half and de-seamed) £70sold

steb alloy tb bracket for the M-series with unused cableguy seals £25sold

M-series exhaust manifold cracked and needs welding (nearly all of them have) £20sold

full set of markcoupe stainless steel water pipes for a/c Ti new and never fitted
upper £35 sold
mid £40 sold
lower £55

markcoupe snakehead downpipe might need a small adjustment to fit but 2.75" and never fitted £120sold

mongoose stainless exhuast sytem for Ti with stainless de-cat pipe used but in very good condition £130

550 ecu with boost cut £45sold

red kv8's for dizzy (these came from an 820 turbo i bought them and just assumed they would fit my Ti so check there ok for you car) £30sold

irridium plugs used but lots of life left in them £10

paddle clutch believed to be helix but would need part nos to confirm used but again i don't know how much life it has left unless interested parties could give me a new plate thickness to compare it with preasure plate is good though £50 sold

cold air box looks home made (riveted ali) with an itg filter £25sold

i have a second steel caged box but don't know what diff it has till i drain the oil and have a look(it came from a 300bhp coupe thats all i know) price will depend on diff

thats all i can think of off the top of my head i know there's more will have a sort out over the weekend and update

can sort out pics of stuff if needed no worries

[garry_noble]

550 ecu is tht for 4 gap flyhweel ?? If so i take that and upper stainless steel pipe ?? Can u post pick so i can confirm its one i want

[Turbo-Rush]

550 is as far as i know the old style 2 gap but maybe wrong i just went buying stuff lol

upper pipe is the 1 that runs along the top of the engine above the exhaust manifold will dig it out of the shed and get a pick up

[rovermadman4825]

shame you need to sell your rarther tasty bits

so does that mean you wont get to do your Ti

[InB4Mike]

pics please

[Turbo-Rush]

hi ross

it will get put back together but in pretty much in standard form, i've fell in love with the scooby and its growing on the other half now

[Turbo-Rush]

pics please

pics of what my friend?

[InB4Mike]

all your goodies or am i missing something

[HA54SYM]

Will the snakehead fit a 220?

Dave

[Turbo-Rush]

not sure what point your trying to make but just ask markcoupe or ross rovermad i've spent a small fortune on bit over the last few months on bits...

you could also pm jollins86 as i went/collected and paid cash for his apexi avc-r

this is the engine, pic is saved on my comp and ross has the exhaust manifold really wanted that aswel at the time..





clutch


18's but think i'm gonna keep them, thats the pic that started my pending build when the standard gearbox let go well diff bearings anyway

[Turbo-Rush]

Will the snakehead fit a 220?

Dave

i would say yes but to be on the safe side pm markcoupe, silverstorm as he sold it to me and used to supply many members on here with them...

i'm not out to rip anyone off just being honest and selling on the parts i collected but now won't be using...

[Roger Red Hat]

what manifold is that in the pic?

ignore that skim read failing!


shame i wanted!!

[Roger Red Hat]

also, that snake head is a fricking steal!! super big improvement.

[rovermadman4825]

hi ross

it will get put back together but in pretty much in standard form, i've fell in love with the scooby and its growing on the other half now

Well at least it'll live on

but be carefull...when you get your Ti on the road you might want to start playing with it again

I want to see a pic of your polished inlet to see if its better than mine

[Turbo-Rush]

doubt it'll be better than yours bud you've had far more spare time than me

[220Lee]

Really liking that polished inlet manifold in the pictures, is it an easy job swaping t to m-series, is it possible to just swap over the top halfs?

Cheers

[rovermadman4825]

Really liking that polished inlet manifold in the pictures, is it an easy job swaping t to m-series, is it possible to just swap over the top halfs?

Cheers

Yeah you can swap them over straight forward enougth but you'll need the M-series ally throttle body mount and you'll need to elong gate a couple of holes

doubt it'll be better than yours bud you've had far more spare time than me

Mine aint that good as I got it half decent then thought that'll do

[Turbo-Rush]

if you look closely thats an old pic before i de-seamed it and polished it up properly

trying to get new pics up but struggle'ng with my phone and my big fat fingers

[BLACKSHADDOW]

is the paddle for sale ?

[Turbo-Rush]

is the paddle for sale ?

yes but like i stated it's used and i have no idea on how much life the friction plate has left in it but the preasure plate is good

[220Lee]

Yeah you can swap them over straight forward enougth but you'll need the M-series ally throttle body mount and you'll need to elong gate a couple of holes

So is it just the top half you change and do the 2 top supports line up? as i've got nice shiny stainless ones on at the mo

[rovermadman4825]

Yeah you can swap them over straight forward enougth but you'll need the M-series ally throttle body mount and you'll need to elong gate a couple of holes

So is it just the top half you change and do the 2 top supports line up? as i've got nice shiny stainless ones on at the mo

Am unsure on the supports mate

but you can just swap the top halfs over

[BLACKSHADDOW]

do u no roughly how many miles it done m8 and how much u want

[Zreddor]

Interested in the gearbox, got any more info on what diff it is?

[matt077]

can you pm me abit about the engine? who did the work etc

can pick it up this weekend also if pos

[Mat_clarke]

can you pm me abit about the engine? who did the work etc

can pick it up this weekend also if pos

grab the clutch for me if you do

[matt077]

can you pm me abit about the engine? who did the work etc

can pick it up this weekend also if pos

grab the clutch for me if you do

you after the paddle mate?

[Mat_clarke]

can you pm me abit about the engine? who did the work etc

can pick it up this weekend also if pos

grab the clutch for me if you do

you after the paddle mate?

yeaa,

[BLACKSHADDOW]

can you pm me abit about the engine? who did the work etc

can pick it up this weekend also if pos

grab the clutch for me if you do

i was first

[reggy5]

cover looks like a standard valeo one i might be wrong tho!

[Turbo-Rush]

sorry for the delay in getting around to all the pm's

needed to crack on with a customers laptop and got to be up at 6am for the day job so to those i haven't replied to yet i'll get on it tomoz teatime after work

thanks for all the interest guys

[Hayleyb]

red kv8's for dizzy £30

Do they come with the coil lead, if so ill take them.

Hayley

[Turbo-Rush]

red kv8's for dizzy £30

Do they come with the coil lead, if so ill take them.

Hayley

yes all 5 leads are included

pics of the upper rail sorry for the poor quality camera is playing up

[Turbo-Rush]

Interested in the gearbox, got any more info on what diff it is?

atm its as listed a type B diff box with Ti ratio's deffo on that as i got it off a member on here

the other box i need to drain the oil out and have a look to verify what diff it has

[Turbo-Rush]

snakehead pic