Gauging interest stainless stuff - 200/400/600/Zr/brm

[vinny19791]

Ok I need to raise some fundage

So deciding whether to start this again or not.

I'm also aware that my trader status has expired this will be rectified if any interest.

I need to make carl a brace as I owe him one
I also have found etv s maestro tray
So

Rover 200/400 wedge

Rear upper stainless braces £30
Rear upper twin stainless brace Joined £45
Rear lower stainless braces £30
Stainless battery tray £30
T16 Stainless plug covers £15
K series I may look into £15

Rover 600

Stainless battery trays £30
Stainless plug covers t16 £15

Brm/Zr

Rear upper strut braces £30
T16 stainless plug covers £15
Zr/brm stainless battery tray (possible) £40
As I say merely gauging interest at the minute

[joshreynolds]

I'll take both rear braces and a spark plug cover at the beginning of next month when my PayPal has reset
Josh

[Pinkie15]

As with everything, depends on price, but interested in batt tray for a 600, mine seems to be dissolving/rusting into oblivion.

[daz500]

I'd be interested in a rear upper brace for the zr and the r8 wedge. Have you any pictures of what these look like, showing overall build quality / welding etc?

[vinny19791]

I'll get pics up
Welding is a1 though as dad has engineering company that does stainless machinery

[Chaz]

Got a pic of the rear strut brace mate?

I might have it off ya.. Only just up the road as well

[Steve_l]

Interested in both rear braces for 200 wedge

[jonna]

a would be intrested in a rear brace

[ghall2004]

Would take both upper and lower rear strut brace

[mike88]

rear upper brace in my BRM

[vinny19791]

Thanks mike

I'll leave this for a few days to get interest.

I'll also get more pics

[E_T_V]

Lower front brace for the R8?

People may still want battery trays but as I thought mine was lost without a trace I bought the entire stock of new battery trays at a bargain price from Xpart and flooded the market with them.

[vinny19791]

Lower front?

Where exactly

Kudos for the battery trays

1) pengy_666 - Zr rear upper brace

[pengy_666]

I'M interested in Rear Brace for ZR.

Can you get front strut brace's?

[1994 BRG Coupe]

Pic of how the rear upper brace mounts to the car please. Is it a fixed length or adjustable?

[E_T_V]

Front brace can take a few forms.

The most simple is the same as the rear, i.e. between the arm mounting point to prevent them flexing. An issue on the R8 as shown by all the chassis cracks.

A more advanced one would be a cradle joining to the front subframe mounting points but that'd be much more complicated.

[leon540]

I'd be interested in the spark cover as I hate seeing my sparks now haha

[stefaclese]

Might be interested in an R8 rear upper, and very interested in a front lower (which *should* then automatically fit a 200/25/ZR bubble).

[_BILLY_ZR_]

I think you should make zr Rear anti roll bars ive been after one since POL last year


no one makes them new so it could make a few £££ for ya

[Chaz]

I think you should make zr Rear anti roll bars ive been after one since POL last year


no one makes them new so it could make a few £££ for ya

Just get one off a Rover 200 bubble mate.. BRM are the best ones..

[vinny19791]

I'll take both rear braces and a spark plug cover at the beginning of next month when my PayPal has reset
Josh

Which car?
Trying to get an idea of numbers

[ghall2004]

Would take both upper and lower rear strut brace

R8 93' 220 Gti for me Vinny if this goes ahead

[vinny19791]

a would be intrested in a rear brace

Which car please

[adamgreenmgturb]

any fit 800 tubby engine

[vinny19791]

Only the spark plug cover tbh

[joshreynolds]

I'll take both rear braces and a spark plug cover at the beginning of next month when my PayPal has reset
Josh

Which car?
Trying to get an idea of numbers

Sorry buddy 220 coupe
Josh

[robturbo69]

i'll have a 600 plug cover off you. pm me when ya got one done.

do you do the bolts for it too.?

how much is delivery..

cheers

[vinny19791]

Pm'd

Ok pic of the 200/400 battery tray



Rear upper brace in my 200

Been in about 18 months. Ignore the hacked trim, previous owner did it for koni adjustment.
Ideally you'd do this (thanks mike88) - fitted to his brm

[harland292]

Spark plug cover also, T16..

[vinny19791]

This gives you an idea on a plug cover with bolts.
The roversport one is mine the two at the rear are what I had left over from a year or so back but gives you an idea of what you get

[Chaz]

Vinny did you get my PM mate??

[ourafilmes]

I need a battery tray for my 220TC.

[vinny19791]

Well hopefully I've responded to everyone either on here or pm. By the end of the week I can get an idea of what is wanted, then can start getting stuff fabricated. Probably looking at 4 weeks until a delivery date. But I have my own Zr here that I may look at to see what else I can offer.

Thanks again.

Ps would a Zr/brm battery tray interest anyone?
Slightly more complicated as the airbox bolts to one side and ecu to the other. But it's something I'll consider, although it's plastic and doesn't rust the Bolts must be made of dust

[ravinder]

Put me down for the two upper braces and plug cover for BRM. Thanks.

[Chaz]

Ooo a ZR battery box, now that would look the bo**ocks if it had a stainless cover as well

My box is nakered the bit that fixs the battery down has snapped off so my battery is sliding about everywhere.. Might be something to consider Vinny