Rovertech 2.0

Where do I start breaking due to engine fault

All prices are plus postage

285 piper cams £150
Piper pullies blue £100 sold paid
Gt30 ball bearing turbo like new less then 500 miles £500
Alloy billet fly wheel £175 sold paid
Helix fast road clutch not paddle £150 sold paid
Gbe frontmount inter cooler £120 sold paid
Samco boost hoses in blue has been cut for dumpvalve £50 sold paid
Samco water blue £75 sold paid
Rc 650 injectors £100
Type a gearbox £100
Type b gearbox £100 sold paid
Stainless rails I have 2 sets top mid and bottom £60 a set 1 set sold paid
Emerald k6 ecu loom Map sensor £600 sold paid
Oz super leggra alloys x6 £250
Tarox 6 pot 300mm break kit £400 sold
Hks evc 5 boost controller £120
Turbo smart dump valve and t £60 sold paid
Fse fuel pressure reg and gauge £40 sold paid
Brand new systec 255 pump £50
Gaz gold coilovers £350
Silicon heater matrix hose £40 sold paid


May have missed other bits so if u need anything ask

Have you got tappets for the cams?

Whats the spec on the fse, what does it come with?

How old are the cams?

Dave

What's the Ian must be bad one good luck pal

All water and matrix hoses in blue please

Also, if you have them, ARP head bolts?

OOO and stainless rails also! Lol

Some one better call 999 steve has just suffered major cardiac arrest

Interested in the take a Break kit kat breaks

I think I've just poo'd

Piper pullies and coil overs.
Condition of both? Photos

Crome

What's happened to engine ??

I see no cylinder head or bottom end mentioned it blow up or belt broke and took the lot out ?

Will pm everyone tomrrow it is all first come first serve

quick question just wondered weather the front mount came with pipe work and hoses ? thanks roleyyyy

Front mount will work with standard hoses it's a gbe one cost £400 new

Please can you show a pic of the GAZ coilover kit? I'm just interested in the condition of them before commiting.

Sorry to hear this Ian, i thought you'd never sell/break this

Must have bin bad!

Flywheel.. Interested.

I'm running a DTA ecu, so just assume would need re-map from my current 4 gap to this single gap billet.?

What about clutch.?? I have a carbon Kevlar clutch. Are they the same clutch fitting.??

Flywheel back up forsale £185 delivered

I posted a question on flywheel but got no answer..??

No need to adjust map. Just update trigger wheel setting.

MGZR-TDI-Mk2 wrote:Flywheel.. Interested.

I'm running a DTA ecu, so just assume would need re-map from my current 4 gap to this single gap billet.?

What about clutch.?? I have a carbon Kevlar clutch. Are they the same clutch fitting.??

Sorry m8 the fly wheel is a 4 gap took it off yesterday

BLACKSHADDOW wrote:

MGZR-TDI-Mk2 wrote:Flywheel.. Interested.

I'm running a DTA ecu, so just assume would need re-map from my current 4 gap to this single gap billet.?

What about clutch.?? I have a carbon Kevlar clutch. Are they the same clutch fitting.??

Sorry m8 the fly wheel is a 4 gap took it off yesterday

Pm me picks of the flywheel I'll have it if it's in good knick
Josh

Ok will add a pic tomrrow

Looks like a fidanza flywheel

It's a rover dose one

Jesus, those prices are stunningly cheap. If i had one id have 75% of that stuff now.

BLACKSHADDOW wrote:It's a rover dose one

£400 New then a bargain there for someone

must resist..

Drew

Drew wrote:must resist..

Drew

Treat yourself you only live once

yeah but for how long when the wife see's all the parcels arrive!

Drew

Tried to pm you re:a box.
Still in my outbox so assuming your inbox is full.
Care to clear some?
Thanks

Pm u back m8

Drew wrote:yeah but for how long when the wife see's all the parcels arrive!

Drew

I feel your pain !

Big valve head for sale needs skim £350

Does the valve head come with the cams?

Tappers etc?

Dave