HEL Manufacturing Outlet @ GBE
-
Grant620
- RT GOD
- Posts: 20438
- Joined: Thu Feb 20, 2003 12:23 am
- feedback: 194394
- Location: Somersetshire
- Contact:
Re: HEL Manufacturing Outlet @ GBE
I can see what is done there, but that isn't the correct sealing method Dan.
We can supply it - that's not a problem - but you would not get the warranty with the hoses as it isn't the right way to seal on a Brembo.
We can supply it - that's not a problem - but you would not get the warranty with the hoses as it isn't the right way to seal on a Brembo.
-
Grant620
- RT GOD
- Posts: 20438
- Joined: Thu Feb 20, 2003 12:23 am
- feedback: 194394
- Location: Somersetshire
- Contact:
Re: HEL Manufacturing Outlet @ GBE
Just to add...
Brembo calipers are designed to seal on the outside, not with a taper seal on the inside.
Peugeot calipers are not different to any other Brembo calipers in terms of the sealing. M10x1 thread.
Effectively what Peugeot did is to bottom out the male fitting in the caliper to allow a seal with a swivel part that has a sort of seat on the end of it.
The fitting you have pictured with the stainless hose is one we keep here. So we can build to that spec,.
Brembo calipers are designed to seal on the outside, not with a taper seal on the inside.
Peugeot calipers are not different to any other Brembo calipers in terms of the sealing. M10x1 thread.
Effectively what Peugeot did is to bottom out the male fitting in the caliper to allow a seal with a swivel part that has a sort of seat on the end of it.
The fitting you have pictured with the stainless hose is one we keep here. So we can build to that spec,.
Re: HEL Manufacturing Outlet @ GBE
I have the original pug pipe if you want to see the end or I can send the pipe to yourself if needed.
As said by some others it was the banjos that were having leak problems because of the sealing so I wanted to go to the original pug fitting to negate the need for caliper-bolt-banjo/pipe interface and go straight for the caliper-pipe interface.
As said by some others it was the banjos that were having leak problems because of the sealing so I wanted to go to the original pug fitting to negate the need for caliper-bolt-banjo/pipe interface and go straight for the caliper-pipe interface.
-
Grant620
- RT GOD
- Posts: 20438
- Joined: Thu Feb 20, 2003 12:23 am
- feedback: 194394
- Location: Somersetshire
- Contact:
Re: HEL Manufacturing Outlet @ GBE
I'll say it again - we'll do anything you want.
Re: HEL Manufacturing Outlet @ GBE
If it def isn't the way to do it then I won't argue with ya, it is your job after all!
Just didn't want it leaking all over the place.
If it could be done as the banjo in purple that'd be great then
I'll listen to the experts and take some of the dowry seals too.
Just didn't want it leaking all over the place.
If it could be done as the banjo in purple that'd be great then
I'll listen to the experts and take some of the dowry seals too.
Re: HEL Manufacturing Outlet @ GBE
That's the one 
Re: HEL Manufacturing Outlet @ GBE
Payment sent and I PM'd my address but its still in my outbox.
Let me know if it doesn't arrive.
Thanks.
Edit: - I forgot to ask, how do the rear calliper fixings come? As standard fixing just braided hose?
Let me know if it doesn't arrive.
Thanks.
Edit: - I forgot to ask, how do the rear calliper fixings come? As standard fixing just braided hose?
-
Geo_coupe
- RT BiKiloPoster
- Posts: 2558
- Joined: Sun Oct 01, 2006 5:36 pm
- feedback: 902593
- Location: Dalkeith, Nr Edinburgh
Re: HEL Manufacturing Outlet @ GBE
Can you do bike hoses as well as car ones grant? Ill be looking at getting a braided front set for my 96 bandit in the next few weeks.

94 D16 Coupe Turbo- Rotten
'96 D16 Coupe - Sold! '91 216 GTi Twin Cam - Sold!
'93 D16 Coupe - current
-
Grant620
- RT GOD
- Posts: 20438
- Joined: Thu Feb 20, 2003 12:23 am
- feedback: 194394
- Location: Somersetshire
- Contact:
Re: HEL Manufacturing Outlet @ GBE
No problem at all.Geo_coupe wrote:Can you do bike hoses as well as car ones grant? Ill be looking at getting a braided front set for my 96 bandit in the next few weeks.
-
Grant620
- RT GOD
- Posts: 20438
- Joined: Thu Feb 20, 2003 12:23 am
- feedback: 194394
- Location: Somersetshire
- Contact:
Re: HEL Manufacturing Outlet @ GBE
Thanks - got it.Skillen wrote:Payment sent and I PM'd my address but its still in my outbox.
Let me know if it doesn't arrive.
Thanks.
Edit: - I forgot to ask, how do the rear calliper fixings come? As standard fixing just braided hose?
Rear hoses are as per OE, but braided SS.
-
samsexpress
- Rovertech Veteran
- Posts: 822
- Joined: Thu Dec 04, 2008 6:20 pm
- feedback: 1035461
- Location: wrexham
Re: HEL Manufacturing Outlet @ GBE
rear drum model zr hoses grant?
Project turbo Express....forged T series Killer...engine no4 come at me
Audi s4 v6 bi turbo...340bhp
Audi s4 v6 bi turbo...340bhp
-
Grant620
- RT GOD
- Posts: 20438
- Joined: Thu Feb 20, 2003 12:23 am
- feedback: 194394
- Location: Somersetshire
- Contact:
Re: HEL Manufacturing Outlet @ GBE
No problem.
M10 female both ends of the rear hose and about a 300mm long hose end to end?
In stock in any colour now
M10 female both ends of the rear hose and about a 300mm long hose end to end?
In stock in any colour now
-
Grant620
- RT GOD
- Posts: 20438
- Joined: Thu Feb 20, 2003 12:23 am
- feedback: 194394
- Location: Somersetshire
- Contact:
Re: HEL Manufacturing Outlet @ GBE
Well, push a spike up my bum...
I've just been doing some digging and it turns out that Brembo made a SINGLE part number with an internal seat to allow a male fitting to be used OR a Banjo.
Only ever used by one OEM manufacturer, that being Peugeot!
In the case of an "old" caliper I concur that it might actually be beneficial to use the male fitting.
Just getting my hat out and eating it, followed by a desert of humble pie.
Apologies to Dan. Seems we were both right, but the male fitting will work OR the banjo.
I've just been doing some digging and it turns out that Brembo made a SINGLE part number with an internal seat to allow a male fitting to be used OR a Banjo.
Only ever used by one OEM manufacturer, that being Peugeot!
In the case of an "old" caliper I concur that it might actually be beneficial to use the male fitting.
Just getting my hat out and eating it, followed by a desert of humble pie.
Apologies to Dan. Seems we were both right, but the male fitting will work OR the banjo.
Re: HEL Manufacturing Outlet @ GBE
How would sir like his hat cooked 
T16turboZS created by AMW Motorsport


-
samsexpress
- Rovertech Veteran
- Posts: 822
- Joined: Thu Dec 04, 2008 6:20 pm
- feedback: 1035461
- Location: wrexham
Re: HEL Manufacturing Outlet @ GBE
how much matey?? pinkGrant620 wrote:No problem.
M10 female both ends of the rear hose and about a 300mm long hose end to end?
In stock in any colour now
Project turbo Express....forged T series Killer...engine no4 come at me
Audi s4 v6 bi turbo...340bhp
Audi s4 v6 bi turbo...340bhp
-
Grant620
- RT GOD
- Posts: 20438
- Joined: Thu Feb 20, 2003 12:23 am
- feedback: 194394
- Location: Somersetshire
- Contact:
Re: HEL Manufacturing Outlet @ GBE
Rare.peteT16 wrote:How would sir like his hat cooked
-
Grant620
- RT GOD
- Posts: 20438
- Joined: Thu Feb 20, 2003 12:23 am
- feedback: 194394
- Location: Somersetshire
- Contact:
Re: HEL Manufacturing Outlet @ GBE
£55 deliveredsamsexpress wrote:how much matey?? pinkGrant620 wrote:No problem.
M10 female both ends of the rear hose and about a 300mm long hose end to end?
In stock in any colour now
Please let me know ASAP as Pink is the ONLY colour I don't have! Will be able to have them ready for Friday though
Re: HEL Manufacturing Outlet @ GBE
Well that is good to know I suppose! Mine are being fully cleaned up so no corrosion around the joint.
But I would prefer if I didn't have to clean up the surface and potentially ruin my lacquer again (Peter will vouch for my clumsiness!) so would it be possible to have that fitting?
It really does reduce the chance of me messing it all up as well!
Sorry for the hassle this is causing :/
But I would prefer if I didn't have to clean up the surface and potentially ruin my lacquer again (Peter will vouch for my clumsiness!) so would it be possible to have that fitting?
It really does reduce the chance of me messing it all up as well!
Sorry for the hassle this is causing :/
-
Grant620
- RT GOD
- Posts: 20438
- Joined: Thu Feb 20, 2003 12:23 am
- feedback: 194394
- Location: Somersetshire
- Contact:
Re: HEL Manufacturing Outlet @ GBE
No problem at all.
I've amended the lines already
I've amended the lines already
-
Cableguy
- Silver Trader

- Posts: 22323
- Joined: Mon Jun 14, 2004 11:21 am
- feedback: 311135
- Location: Near Junction 9 M6
Re: HEL Manufacturing Outlet @ GBE
Sh1t the bed, can you say that in my good ear ?Grant620 wrote: Apologies to Dan.

The Storm Has Gone Again
Bubble/Mk3 conversion looms available including wasted spark AND ZS, pm for prices !
-
samsexpress
- Rovertech Veteran
- Posts: 822
- Joined: Thu Dec 04, 2008 6:20 pm
- feedback: 1035461
- Location: wrexham
Re: HEL Manufacturing Outlet @ GBE
Is that for just the rears?? I was only messing with pink as I knew you wouldn't have them lol
Project turbo Express....forged T series Killer...engine no4 come at me
Audi s4 v6 bi turbo...340bhp
Audi s4 v6 bi turbo...340bhp
-
Cableguy
- Silver Trader

- Posts: 22323
- Joined: Mon Jun 14, 2004 11:21 am
- feedback: 311135
- Location: Near Junction 9 M6
Re: HEL Manufacturing Outlet @ GBE
Pink suits drums though, limp and gaysamsexpress wrote:Is that for just the rears?? I was only messing with pink as I knew you wouldn't have them lol

The Storm Has Gone Again
Bubble/Mk3 conversion looms available including wasted spark AND ZS, pm for prices !
Re: HEL Manufacturing Outlet @ GBE
Thank you very muchGrant620 wrote:No problem at all.
I've amended the lines already
-
samsexpress
- Rovertech Veteran
- Posts: 822
- Joined: Thu Dec 04, 2008 6:20 pm
- feedback: 1035461
- Location: wrexham
Re: HEL Manufacturing Outlet @ GBE
Your gayCableguy wrote:Pink suits drums though, limp and gaysamsexpress wrote:Is that for just the rears?? I was only messing with pink as I knew you wouldn't have them lol
Project turbo Express....forged T series Killer...engine no4 come at me
Audi s4 v6 bi turbo...340bhp
Audi s4 v6 bi turbo...340bhp
-
Grant620
- RT GOD
- Posts: 20438
- Joined: Thu Feb 20, 2003 12:23 am
- feedback: 194394
- Location: Somersetshire
- Contact:
Re: HEL Manufacturing Outlet @ GBE
Rears only are £35 delivered.samsexpress wrote:Is that for just the rears?? I was only messing with pink as I knew you wouldn't have them lol
