Low mileage Forged bottom end , PG1 Ti box with type B

To post in here you must be a member of the "Classified Approved" group. To become a member of this group you MUST have at least 25 posts on Rovertech. For full details, please click here.

Moderators: Forum Moderators, User Administrators

Forum rules
Can't post in this section? Please read our rules
MarkCoupe
Bronze Trader
Bronze Trader
Posts: 18062
Joined: Wed Apr 30, 2003 10:12 pm
feedback: 195147
Location: Newmarket
Contact:

Low mileage Forged bottom end , PG1 Ti box with type B

Post by MarkCoupe »

Hi folks,

I have for sale a pretty awesome forged bottom end for a T16. Originally a 220 block.

Its covered circa 3000miles. Engine never leaked no oil, even the wicked oi leak corner. The following were fitted at time of build:

Arrow steel rods - £919.15
Custom Wiseco/ JE (the quite ones) 86mm forged pistons - £720
New crank - £144
All bearings - £94.80
Its got a new oil pump £236
Machining and balancing - £212
Zetec (im told) oil squirters machined into the block for extra piston cooling and lubing.

Last month it had a brand new idler pulley and spring at £66
Cambelt (if you want it) genuine - £36
New rear (behind the flywheel) crank seal

Also included is the sump and uprated headbolts of unknown origin but held down the head at 1.9 bar with no leaks from anywhere.

So were looking at a minimum of £2500 of extremely high quality parts. Id be looking for alot less than half of that, due to light marks on piston 4, everything else is perfect, spins over great, bores are perfect, still nice fresh honemarks etc.

Painted gold (but could obviously be repainted).

For serious enquiries and more information, please email me at wmswallis@aol.com
Image
Sum carz
MarkCoupe
Bronze Trader
Bronze Trader
Posts: 18062
Joined: Wed Apr 30, 2003 10:12 pm
feedback: 195147
Location: Newmarket
Contact:

Re: Low mileage Forged bottom end , PG1 Ti box with type B

Post by MarkCoupe »

Oh, and a 620Ti short ratio (except 5th which is long on the ti box for cruising and fuel economy), everything about this box feels mint. No whines, no crunches, nothing, just laps up the power.Engineered/nuilt to the highest quality as with everything else on the car.

£250

£210 if you remove yourself.
Image
Sum carz
Rizzy
Rovertech Kiloposter
Posts: 1838
Joined: Wed Apr 19, 2006 7:49 pm
feedback: 943118
Location: bradford and always moving

Re: Low mileage Forged bottom end , PG1 Ti box with type B

Post by Rizzy »

mark cant believe you broke it mate?
Image
carl747
RT GOD
Posts: 6445
Joined: Mon Aug 18, 2008 7:52 pm
feedback: 939252
Location: East Midlands
Contact:

Re: Low mileage Forged bottom end , PG1 Ti box with type B

Post by carl747 »

£2500 :scared:

not being funny mark but no one on heres going to pay that as the car didn't cost you that much
syzsounds
RT GOD
Posts: 4251
Joined: Sat May 31, 2003 12:28 am
feedback: 233510
Location: Nottingham

Re: Low mileage Forged bottom end , PG1 Ti box with type B

Post by syzsounds »

carl747 wrote:£2500 :scared:

not being funny mark but no one on heres going to pay that as the car didn't cost you that much
Skim read fail :facepalm:
No longer a Rover owner :-(
Now driving a Honda 2.4 vtec estate and a Honda VFR 750.
Staying around for the LOLZ.
stefaclese
RT GOD
Posts: 10342
Joined: Mon Mar 12, 2007 5:48 pm
feedback: 818799
Location: Oxfordshire

Re: Low mileage Forged bottom end , PG1 Ti box with type B

Post by stefaclese »

syzsounds wrote:
carl747 wrote:£2500 :scared:

not being funny mark but no one on heres going to pay that as the car didn't cost you that much
Skim read fail :facepalm:
Beat me to it :lol:
carl747
RT GOD
Posts: 6445
Joined: Mon Aug 18, 2008 7:52 pm
feedback: 939252
Location: East Midlands
Contact:

Re: Low mileage Forged bottom end , PG1 Ti box with type B

Post by carl747 »

stefaclese wrote:
syzsounds wrote:
carl747 wrote:£2500 :scared:

not being funny mark but no one on heres going to pay that as the car didn't cost you that much
Skim read fail :facepalm:
Beat me to it :lol:
:facepalm: Fail :lol:

sorry mark
m4cwo
Rovertech Kiloposter
Posts: 1986
Joined: Fri Jun 27, 2008 4:07 pm
feedback: 1019542
Location: prestonpans

Re: Low mileage Forged bottom end , PG1 Ti box with type B

Post by m4cwo »

I've seen a few cases of this now and wonder why people always say that you wont get that price as you only paid ex amount for it? at the end of the day it doesn't matter what you buy something for it's what you sell it for.

Does any one agree?
Allanwarnock
Rovertech Kiloposter
Posts: 1770
Joined: Thu Apr 02, 2009 12:09 am
feedback: 1041558
Location: Lanarkshire

Re: Low mileage Forged bottom end , PG1 Ti box with type B

Post by Allanwarnock »

m4cwo wrote:I've seen a few cases of this now and wonder why people always say that you wont get that price as you only paid ex amount for it? at the end of the day it doesn't matter what you buy something for it's what you sell it for.

Does any one agree?
True that...
Im thinking about taking it.. looking at the bank balance and thinking... Ibiza or boooost!
"Alrite mate, whats in that?"
"im in it"
Image
maestrovdpt16
RT GOD
Posts: 3271
Joined: Sun Apr 05, 2009 9:46 pm
feedback: 1034706
Location: Cambridge

Re: Low mileage Forged bottom end , PG1 Ti box with type B

Post by maestrovdpt16 »

The gearbox is sold. :whistle:
MarkCoupe
Bronze Trader
Bronze Trader
Posts: 18062
Joined: Wed Apr 30, 2003 10:12 pm
feedback: 195147
Location: Newmarket
Contact:

Re: Low mileage Forged bottom end , PG1 Ti box with type B

Post by MarkCoupe »

carl747 wrote:£2500 :scared:

not being funny mark but no one on heres going to pay that as the car didn't cost you that much
Hi Carl

It doesnt matter what i bought the car for does it dude. My boss has left me a Ferarri 550 M in his will does that mean i should sell it for free?

But if you read the advert it says thats what the parts alone cost and that ill be selling it for much less than half the price of the parts alone.

PS - With the tax, the parts i needed just to get the car running to allow it to be driven home when i bought it, £2500 is what it cost me. Then add all of the money i paid when half the elctronics (that might add i didnt touch :lol: ) started dying and i had to replace them.
Image
Sum carz
chiefgilray
Forum Senior
Posts: 204
Joined: Thu May 14, 2009 12:27 pm
feedback: 1205869
Location: Aberdeen!!!!!

Re: Low mileage Forged bottom end , PG1 Ti box with type B

Post by chiefgilray »

No way I literally ran outside to get a signal to pm you about the box and postage grrr arrrg

I'll buy the Ferrari for free though... It would be funny of your boss was 10 years younger than you
MarkCoupe
Bronze Trader
Bronze Trader
Posts: 18062
Joined: Wed Apr 30, 2003 10:12 pm
feedback: 195147
Location: Newmarket
Contact:

Re: Low mileage Forged bottom end , PG1 Ti box with type B

Post by MarkCoupe »

m4cwo wrote:I've seen a few cases of this now and wonder why people always say that you wont get that price as you only paid ex amount for it? at the end of the day it doesn't matter what you buy something for it's what you sell it for.

Does any one agree?

Yes, i do. End of the day, the car was about its money, it needed a fair amount of work after i got it back, and i didnt have the money to do everything it needed doing. On my life i never bought the car with intention of breaking it. Phil (maestrovdp) will back me up on this, when i took him out in it both of us were grinning ear to ear, i bought a grands worth of PLX, subframes for recaros, an alarm fitted, £500 worth of silicone, £200 worth of cambelt fitting, £wheels, £900 worth of Gaz Gold coilovers. Noone does that if they bought a car just to break.
Image
Sum carz
MarkCoupe
Bronze Trader
Bronze Trader
Posts: 18062
Joined: Wed Apr 30, 2003 10:12 pm
feedback: 195147
Location: Newmarket
Contact:

Re: Low mileage Forged bottom end , PG1 Ti box with type B

Post by MarkCoupe »

chiefgilray wrote:No way I literally ran outside to get a signal to pm you about the box and postage grrr arrrg

I'll buy the Ferrari for free though... It would be funny of your boss was 10 years younger than you
:lol:

Neg, Im 28, hes 68, although most of the time id rather have him than the Ferarri, ive learnt alot from him about life, women, money etc.


Regards to the box, Phils expressed interest and has first dibs but no moneys changed hands.
Image
Sum carz
alexcornwall
Rovertech Kiloposter
Posts: 1489
Joined: Tue Jun 03, 2008 4:36 pm
feedback: 981998
Location: Cornwall

Re: Low mileage Forged bottom end , PG1 Ti box with type B

Post by alexcornwall »

MarkCoupe wrote:most of the time id rather have him than the Ferarri.
made me lol, how much for the engine then? i still know a couple with rovers.
maestrovdpt16
RT GOD
Posts: 3271
Joined: Sun Apr 05, 2009 9:46 pm
feedback: 1034706
Location: Cambridge

Re: Low mileage Forged bottom end , PG1 Ti box with type B

Post by maestrovdpt16 »

I will chip in and say I'm secretly glad the 400 is no more. My maestro did not stand a chance against it!

Joking apart as Mark has already said we went out in this a few times, each time I broke out into a nervous adrenaline junky. The turbo would spool at 2.5, with high lift cams increasing the flow later and thereby giving even more mind twisting power this was finally a car I could see had a lot to sort out but it was a keeper.

I've seen Mark with a few cars now but this was in a different league. I have seen Mark more gutted than when we lifted the head but he has recently split from his wife :|
Dom
Rovertech Kiloposter
Posts: 1197
Joined: Thu May 01, 2003 5:39 pm
feedback: 1043788
Location: Bournemouth
Contact:

Re: Low mileage Forged bottom end , PG1 Ti box with type B

Post by Dom »

Mark - PM'ed.

Thanks,

Dom
Image

Modified Rover Tomcat
Modified TVR Chimaera 450
bristol
Rovertech Kiloposter
Posts: 1503
Joined: Fri Apr 13, 2007 2:39 am
feedback: 1038653
Location: Preston

Re: Low mileage Forged bottom end , PG1 Ti box with type B

Post by bristol »

Mark can you fire me over a PM with a rough figure of what you are after? Im supposed to be buying coilovers on pay day but this is tempting.... Also pictures of piston no.4 :)

Thank mate
Post Reply

Return to “Car Parts for Sale”