Clearout Bits

oneoffcoupe · Post by **oneoffcoupe** » Wed Jun 12, 2013 7:10 pm

oneoffcoupe wrote:
I do have more than 1 pic of some of the items so just ask!

Few more odd's & sod's...200 bubble centre console, dash surround, clock surround & rear view mirror. Fog light blank from a 400 bubble & i think a 400 airfilter box?! Pipes not sure, turbo i think, bit rusty!

Bits & Bobs...???

Laguna Splitter, good condition but usual scratches...cut for the Coupe...£25 collected!

200 Mats, V.good condition but need a bloody good clean! Got a brand new set of these aswell still in original Rover packaging...was gonna keep em for my Coupe but they don't have the cut out for the Petrol/Boot so must be for a 200 Bubble?! Offers?!

Gmax Kit + OE Shocks/Springs! £50 collected for the Gmax & OE Free collected (think 1 of the OE shocks is leaking!

VVC Fan, case is cracked! £10 Collected?!

Bubble Dash, £15 Collected!

& last but not least, a 4" (i think) SS Backbox off of my VVC! V.Good condition, just needs a clean & was loud but sounded nice ...£30 Collected!

I'd rather not throw any of these but will if need be, just need out of the way! Would rather they went to a good home so offers welcome but loads of freebies there & i think the prices are fair! Collection preferred aswell! Cheers, Paul.

oneoffcoupe · Post by **oneoffcoupe** » Sat Jun 15, 2013 4:49 pm

Bump!

Bumpers, Polisher & Door Card's gone!

Post by **ghall2004** » Sat Jun 15, 2013 5:00 pm

What dingbat bought that polisher?

notroubleclubber · Post by **notroubleclubber** » Sat Jun 15, 2013 5:16 pm

Where r u

shayd · Post by **shayd** » Sat Jun 15, 2013 7:30 pm

Were u based intrested in the splitter

gbs100 · Post by **gbs100** » Sat Jun 15, 2013 9:56 pm

I would like the g max bits please were are you based.

oneoffcoupe · Post by **oneoffcoupe** » Sun Jun 16, 2013 12:59 am

ghall2004 wrote:What dingbat bought that polisher?

Well obviously i did in the first place Greg!! & i'm not gonna say but u know em on RCOC!

oneoffcoupe · Post by **oneoffcoupe** » Sun Jun 16, 2013 1:01 am

Sorry guy's, i forgot i didn't have my location on my tag!

I'm in East London, not far from the M25/M11

Jinxy1 · Post by **Jinxy1** » Sun Jun 16, 2013 1:11 am

oneoffcoupe wrote:
ghall2004 wrote:What dingbat bought that polisher?
Well obviously i did in the first place Greg!! & i'm not gonna say but u know em on RCOC!

That'll be me then!

I don't want it, him indoors does and it will NOT be used on the coupe!

Post by **ghall2004** » Sun Jun 16, 2013 8:16 am

Jinxy1 wrote:
oneoffcoupe wrote:
ghall2004 wrote:What dingbat bought that polisher?
Well obviously i did in the first place Greg!! & i'm not gonna say but u know em on RCOC!
That'll be me then!

I don't want it, him indoors does and it will NOT be used on the coupe!

Thank god

oneoffcoupe · Post by **oneoffcoupe** » Mon Jun 17, 2013 7:23 pm

I can travel a few miles, at fuel costs of course

, if anybody want's to meet to collect any bits!

Post by **Cableguy** » Mon Jun 17, 2013 11:27 pm

Thats a rear brace.

oneoffcoupe · Post by **oneoffcoupe** » Tue Jun 18, 2013 1:48 pm

Is it, it fitted the front?!

I wondered why it only had 2 bolt holes tho

Cheers bud!

oneoffcoupe · Post by **oneoffcoupe** » Thu Jul 11, 2013 11:49 pm

Bump!

Wing gone!

oneoffcoupe · Post by **oneoffcoupe** » Mon Jul 22, 2013 3:13 pm

couple of extra bits....

Rear only, Koni Yellow adjustables...worked fine & only took off car cos they hit my Skunk2 LCA's so not recommended to fit with those unless u get the forks extended!

£100 Collected!

Universal Carbon Cone Air Filter...only on car a few weeks & comes with a 76mm reducer that cost extra attached!

£20 Collected!

oneoffcoupe · Post by **oneoffcoupe** » Mon Aug 05, 2013 11:41 pm

oneoffcoupe · Post by **oneoffcoupe** » Sat Aug 24, 2013 12:16 am

Bumps

LJ · Post by LJ » Sat Aug 24, 2013 11:41 pm

Where are you?

What's lowering kit for will it fit 220sdi?

oneoffcoupe · Post by **oneoffcoupe** » Sun Aug 25, 2013 3:40 pm

PM'd u mate.

They're off my Coupe but will fit any R8 & I'm in London.

Cheers, Paul.

oneoffcoupe · Post by **oneoffcoupe** » Tue Sep 03, 2013 12:26 am

Monday Bump

E_T_V · Post by **E_T_V** » Tue Sep 03, 2013 4:00 pm

Is VVC inlet available still?

Also any chance of measuring how long the forks are on the Konis (I've got some new ones but I think they might have longer forks on them?

oneoffcoupe · Post by **oneoffcoupe** » Wed Sep 04, 2013 12:42 pm

Inlet manifold still available mate.

The forks are roughly 5 & a half cm's measuring from inside the fork top to bottom NOT to the bolt hole & 4 & a quarter cm's from the bend to the bottom....this is where the LCA's hit!

Would be interesting to know wot ur measurements are, wot are ur plans for em mate?!

Paul.

E_T_V · Post by **E_T_V** » Wed Sep 04, 2013 3:50 pm

How much for the manifold posted (Sorry didn't spot a price - apologies if I missed it)

Plans for Konis, well they are currently missing the bottom spring cup/retainer part. If I can get hold of these then plan is to fit them! I need to check whether they are Honda or Rover ones though as If they are honda then I can fit my LCA's more easily.

Chaz · Post by **Chaz** » Wed Sep 04, 2013 4:48 pm

Has the rear brace sold?

oneoffcoupe · Post by **oneoffcoupe** » Wed Sep 04, 2013 11:13 pm

E_T_V wrote:How much for the manifold posted (Sorry didn't spot a price - apologies if I missed it)

Plans for Konis, well they are currently missing the bottom spring cup/retainer part. If I can get hold of these then plan is to fit them! I need to check whether they are Honda or Rover ones though as If they are honda then I can fit my LCA's more easily.

There's no price mate but how's about 40quid posted sound?! By memory i think the TB on it is damaged but i do have another plastic one for sale aswell!

If you could let me know wot part number the Koni's are or wether they are Rover or Honda's that'll be great...i'm trying to find out which Honda shocks will fit my Coupe & coming up with all kinds of things!

Paul.

E_T_V · Post by **E_T_V** » Thu Sep 05, 2013 12:00 am

I'll have a look when i'm next in the garage and let you know!

oneoffcoupe · Post by **oneoffcoupe** » Thu Sep 05, 2013 12:21 am

Chaz wrote:Has the rear brace sold?

Nope, it's still here Chaz

Chaz · Post by **Chaz** » Thu Sep 05, 2013 12:29 am

oneoffcoupe wrote:
Chaz wrote:Has the rear brace sold?

Nope, it's still here Chaz

Would you consider posting ??

oneoffcoupe · Post by **oneoffcoupe** » Thu Sep 05, 2013 7:04 pm

E_T_V wrote:I'll have a look when i'm next in the garage and let you know!

Cheers mate.

Let me know wot u wanna do about the manifold!

oneoffcoupe · Post by **oneoffcoupe** » Thu Sep 05, 2013 7:09 pm

Chaz wrote:
oneoffcoupe wrote:
Chaz wrote:Has the rear brace sold?

Nope, it's still here Chaz
Would you consider posting ??

Obviously it's an odd shape to wrap & i couldn't guarantee it not getting damaged mate! I'll only use the post office but will try & get a price if u want!

Where about's ru?!

BootydoZs · Post by **BootydoZs** » Thu Oct 03, 2013 3:19 pm

yea if chaz dont have it can i? hampshire.

Chaz · Post by **Chaz** » Thu Oct 03, 2013 4:31 pm

Sorry forgot about this..

iv got a brace sorted now mate, so mark its all yours dude..

oneoffcoupe · Post by **oneoffcoupe** » Sat Oct 05, 2013 2:56 pm

Really sorry guy's, i'm having trouble with this site & tbh, i forgot about this too

The brace is NLA now!
Again, :sorry:

oneoffcoupe · Post by **oneoffcoupe** » Mon Nov 11, 2013 11:53 pm

Anybody for any bits that i can take to the NEC?!

oneoffcoupe · Post by **oneoffcoupe** » Sun Jan 12, 2014 12:57 am

Rovertech 2.0

Clearout Bits

Clearout Bits

Re: Clearout Bits

Re: Clearout Bits

Re: Clearout Bits

Re: Clearout Bits

Re: Clearout Bits

Re: Clearout Bits

Re: Clearout Bits

Re: Clearout Bits

Re: Clearout Bits

Re: Clearout Bits

Re: Clearout Bits

Re: Clearout Bits

Re: Clearout Bits

Re: Clearout Bits

Re: Clearout Bits

Re: Clearout Bits

Re: Clearout Bits

Re: Clearout Bits

Re: Clearout Bits

Re: Clearout Bits

Re: Clearout Bits

Re: Clearout Bits

Re: Clearout Bits

Re: Clearout Bits

Re: Clearout Bits

Re: Clearout Bits

Re: Clearout Bits

Re: Clearout Bits

Re: Clearout Bits

Re: Clearout Bits

Re: Clearout Bits

Re: Clearout Bits

Re: Clearout Bits

Re: Clearout Bits