HEL Manufacturing Outlet @ GBE

GBE provide all parts for turbocharged cars, including replacement and aftermarket tuning parts. Ranging from simple boost controllers to full engine rebuild kits.
Grant620
RT GOD
Posts: 20438
Joined: Thu Feb 20, 2003 12:23 am
feedback: 194394
Location: Somersetshire
Contact:

Re: HEL Manufacturing Outlet @ GBE

Post by Grant620 »

I can see what is done there, but that isn't the correct sealing method Dan.
We can supply it - that's not a problem - but you would not get the warranty with the hoses as it isn't the right way to seal on a Brembo.
Grant620
RT GOD
Posts: 20438
Joined: Thu Feb 20, 2003 12:23 am
feedback: 194394
Location: Somersetshire
Contact:

Re: HEL Manufacturing Outlet @ GBE

Post by Grant620 »

Just to add...
Brembo calipers are designed to seal on the outside, not with a taper seal on the inside.
Peugeot calipers are not different to any other Brembo calipers in terms of the sealing. M10x1 thread.
Effectively what Peugeot did is to bottom out the male fitting in the caliper to allow a seal with a swivel part that has a sort of seat on the end of it.
The fitting you have pictured with the stainless hose is one we keep here. So we can build to that spec,.
Skillen
Forum Senior
Posts: 249
Joined: Sun Mar 25, 2012 11:43 pm
feedback: 1382285

Re: HEL Manufacturing Outlet @ GBE

Post by Skillen »

I have the original pug pipe if you want to see the end or I can send the pipe to yourself if needed.
As said by some others it was the banjos that were having leak problems because of the sealing so I wanted to go to the original pug fitting to negate the need for caliper-bolt-banjo/pipe interface and go straight for the caliper-pipe interface.
Grant620
RT GOD
Posts: 20438
Joined: Thu Feb 20, 2003 12:23 am
feedback: 194394
Location: Somersetshire
Contact:

Re: HEL Manufacturing Outlet @ GBE

Post by Grant620 »

I'll say it again - we'll do anything you want.
Skillen
Forum Senior
Posts: 249
Joined: Sun Mar 25, 2012 11:43 pm
feedback: 1382285

Re: HEL Manufacturing Outlet @ GBE

Post by Skillen »

If it def isn't the way to do it then I won't argue with ya, it is your job after all!
Just didn't want it leaking all over the place.
If it could be done as the banjo in purple that'd be great then :)
I'll listen to the experts and take some of the dowry seals too.
Grant620
RT GOD
Posts: 20438
Joined: Thu Feb 20, 2003 12:23 am
feedback: 194394
Location: Somersetshire
Contact:

Re: HEL Manufacturing Outlet @ GBE

Post by Grant620 »

Purple hose?
Skillen
Forum Senior
Posts: 249
Joined: Sun Mar 25, 2012 11:43 pm
feedback: 1382285

Re: HEL Manufacturing Outlet @ GBE

Post by Skillen »

That's the one :)
Grant620
RT GOD
Posts: 20438
Joined: Thu Feb 20, 2003 12:23 am
feedback: 194394
Location: Somersetshire
Contact:

Re: HEL Manufacturing Outlet @ GBE

Post by Grant620 »

No problem.
Paypal to sales@gb-ent.com :)
Skillen
Forum Senior
Posts: 249
Joined: Sun Mar 25, 2012 11:43 pm
feedback: 1382285

Re: HEL Manufacturing Outlet @ GBE

Post by Skillen »

Payment sent and I PM'd my address but its still in my outbox.
Let me know if it doesn't arrive.
Thanks.

Edit: - I forgot to ask, how do the rear calliper fixings come? As standard fixing just braided hose?
Geo_coupe
RT BiKiloPoster
Posts: 2558
Joined: Sun Oct 01, 2006 5:36 pm
feedback: 902593
Location: Dalkeith, Nr Edinburgh

Re: HEL Manufacturing Outlet @ GBE

Post by Geo_coupe »

Can you do bike hoses as well as car ones grant? Ill be looking at getting a braided front set for my 96 bandit in the next few weeks.
Grant620
RT GOD
Posts: 20438
Joined: Thu Feb 20, 2003 12:23 am
feedback: 194394
Location: Somersetshire
Contact:

Re: HEL Manufacturing Outlet @ GBE

Post by Grant620 »

Geo_coupe wrote:Can you do bike hoses as well as car ones grant? Ill be looking at getting a braided front set for my 96 bandit in the next few weeks.
No problem at all.
:)
Grant620
RT GOD
Posts: 20438
Joined: Thu Feb 20, 2003 12:23 am
feedback: 194394
Location: Somersetshire
Contact:

Re: HEL Manufacturing Outlet @ GBE

Post by Grant620 »

Skillen wrote:Payment sent and I PM'd my address but its still in my outbox.
Let me know if it doesn't arrive.
Thanks.

Edit: - I forgot to ask, how do the rear calliper fixings come? As standard fixing just braided hose?
Thanks - got it.
Rear hoses are as per OE, but braided SS.
samsexpress
Rovertech Veteran
Posts: 822
Joined: Thu Dec 04, 2008 6:20 pm
feedback: 1035461
Location: wrexham

Re: HEL Manufacturing Outlet @ GBE

Post by samsexpress »

rear drum model zr hoses grant?
Project turbo Express....forged T series Killer...engine no4 come at me

Audi s4 v6 bi turbo...340bhp :)
Grant620
RT GOD
Posts: 20438
Joined: Thu Feb 20, 2003 12:23 am
feedback: 194394
Location: Somersetshire
Contact:

Re: HEL Manufacturing Outlet @ GBE

Post by Grant620 »

No problem.
M10 female both ends of the rear hose and about a 300mm long hose end to end?
In stock in any colour now :)
Grant620
RT GOD
Posts: 20438
Joined: Thu Feb 20, 2003 12:23 am
feedback: 194394
Location: Somersetshire
Contact:

Re: HEL Manufacturing Outlet @ GBE

Post by Grant620 »

Well, push a spike up my bum...
I've just been doing some digging and it turns out that Brembo made a SINGLE part number with an internal seat to allow a male fitting to be used OR a Banjo.
Only ever used by one OEM manufacturer, that being Peugeot!
In the case of an "old" caliper I concur that it might actually be beneficial to use the male fitting.
Just getting my hat out and eating it, followed by a desert of humble pie.
Apologies to Dan. Seems we were both right, but the male fitting will work OR the banjo. :oops:
peteT16
RT GOD
Posts: 9993
Joined: Sat Feb 22, 2003 9:53 pm
feedback: 387367
Location: Bridgend

Re: HEL Manufacturing Outlet @ GBE

Post by peteT16 »

How would sir like his hat cooked :lol:
T16turboZS created by AMW Motorsport
Image
samsexpress
Rovertech Veteran
Posts: 822
Joined: Thu Dec 04, 2008 6:20 pm
feedback: 1035461
Location: wrexham

Re: HEL Manufacturing Outlet @ GBE

Post by samsexpress »

Grant620 wrote:No problem.
M10 female both ends of the rear hose and about a 300mm long hose end to end?
In stock in any colour now :)
how much matey?? pink :P
Project turbo Express....forged T series Killer...engine no4 come at me

Audi s4 v6 bi turbo...340bhp :)
Grant620
RT GOD
Posts: 20438
Joined: Thu Feb 20, 2003 12:23 am
feedback: 194394
Location: Somersetshire
Contact:

Re: HEL Manufacturing Outlet @ GBE

Post by Grant620 »

peteT16 wrote:How would sir like his hat cooked :lol:
Rare.
Grant620
RT GOD
Posts: 20438
Joined: Thu Feb 20, 2003 12:23 am
feedback: 194394
Location: Somersetshire
Contact:

Re: HEL Manufacturing Outlet @ GBE

Post by Grant620 »

samsexpress wrote:
Grant620 wrote:No problem.
M10 female both ends of the rear hose and about a 300mm long hose end to end?
In stock in any colour now :)
how much matey?? pink :P
£55 delivered :)
Please let me know ASAP as Pink is the ONLY colour I don't have! Will be able to have them ready for Friday though :)
Skillen
Forum Senior
Posts: 249
Joined: Sun Mar 25, 2012 11:43 pm
feedback: 1382285

Re: HEL Manufacturing Outlet @ GBE

Post by Skillen »

Well that is good to know I suppose! Mine are being fully cleaned up so no corrosion around the joint.
But I would prefer if I didn't have to clean up the surface and potentially ruin my lacquer again (Peter will vouch for my clumsiness!) so would it be possible to have that fitting?
It really does reduce the chance of me messing it all up as well!
Sorry for the hassle this is causing :/
Grant620
RT GOD
Posts: 20438
Joined: Thu Feb 20, 2003 12:23 am
feedback: 194394
Location: Somersetshire
Contact:

Re: HEL Manufacturing Outlet @ GBE

Post by Grant620 »

No problem at all.
I've amended the lines already :)
Cableguy
Silver Trader
Silver Trader
Posts: 22323
Joined: Mon Jun 14, 2004 11:21 am
feedback: 311135
Location: Near Junction 9 M6

Re: HEL Manufacturing Outlet @ GBE

Post by Cableguy »

Grant620 wrote: Apologies to Dan.
Sh1t the bed, can you say that in my good ear ? :lol:
Image
The Storm Has Gone Again
Bubble/Mk3 conversion looms available including wasted spark AND ZS, pm for prices !
samsexpress
Rovertech Veteran
Posts: 822
Joined: Thu Dec 04, 2008 6:20 pm
feedback: 1035461
Location: wrexham

Re: HEL Manufacturing Outlet @ GBE

Post by samsexpress »

Is that for just the rears?? I was only messing with pink as I knew you wouldn't have them lol
Project turbo Express....forged T series Killer...engine no4 come at me

Audi s4 v6 bi turbo...340bhp :)
Cableguy
Silver Trader
Silver Trader
Posts: 22323
Joined: Mon Jun 14, 2004 11:21 am
feedback: 311135
Location: Near Junction 9 M6

Re: HEL Manufacturing Outlet @ GBE

Post by Cableguy »

samsexpress wrote:Is that for just the rears?? I was only messing with pink as I knew you wouldn't have them lol
Pink suits drums though, limp and gay :oops:
Image
The Storm Has Gone Again
Bubble/Mk3 conversion looms available including wasted spark AND ZS, pm for prices !
Skillen
Forum Senior
Posts: 249
Joined: Sun Mar 25, 2012 11:43 pm
feedback: 1382285

Re: HEL Manufacturing Outlet @ GBE

Post by Skillen »

Grant620 wrote:No problem at all.
I've amended the lines already :)
Thank you very much :)
samsexpress
Rovertech Veteran
Posts: 822
Joined: Thu Dec 04, 2008 6:20 pm
feedback: 1035461
Location: wrexham

Re: HEL Manufacturing Outlet @ GBE

Post by samsexpress »

Cableguy wrote:
samsexpress wrote:Is that for just the rears?? I was only messing with pink as I knew you wouldn't have them lol
Pink suits drums though, limp and gay :oops:
Your gay :oops:
Project turbo Express....forged T series Killer...engine no4 come at me

Audi s4 v6 bi turbo...340bhp :)
Grant620
RT GOD
Posts: 20438
Joined: Thu Feb 20, 2003 12:23 am
feedback: 194394
Location: Somersetshire
Contact:

Re: HEL Manufacturing Outlet @ GBE

Post by Grant620 »

samsexpress wrote:Is that for just the rears?? I was only messing with pink as I knew you wouldn't have them lol
Rears only are £35 delivered.
Post Reply

Return to “GBE”