Number of cylinders: 4/DOHC
Capacity cm3: 1994
Output:kw (din hp) RPM:::: 145 (197) 6000
Ignition system Description: MAP-i
Trigger location: Cam,crankshaft
Fuel system:
Make: Rover
Type: MEMS
Description: MFI-s
Air metering Type: MAP
TUNEING AND EMISSIONS
Ignition coil:
Primary resitance ohms: 0,71-0,81
Fireing order: 1-3-4-2
Ignition timeing BTDC: Engine/rpm 14+5/800 Not adjustable
Idle speed rpm: 800+50
Oil temp for CO test degrees C : 70
CO content at idle tail pipe Vol.% : 0,5 Max
CO2/O2 content at idle speed Vol.%: 14,5-16/0,1-0,5
HC content at idle speed ppm: 100
Oil presure Bar/rpm: 7,0/6500
LUBRICANTS AND CAPACITIES
Engine oil Grade: SAE 10W/40
Alternative: SAE 10W/30
Engine capacity with filter: 4.5 litres
Gearbox oil grade: SAE 75W/80W
Gearbox fluid capacity : 2.2 litres
Brake fluid Type: super DOT 4
Power steering fluid Type: Dexron ll
Power steering fluid capacity: 1.8 litres
FUEL SYSTEM
System presure without vacume BAR: 3,0+0,2
TIGHTNING TORQUES
Cylinder head
If head bolts have MSPS written on the top
1)45 NM
2)80 NM
3)90 Degrees
If head bolts has KX written on the top
1)45 NM
2)70 NM
3)90 Degrees
Head bolt tightning sequence
CAM PULLY END (9) (3) (1) (5) (7)
CAM PULLY END(8 ) (6) (2) (4) (10)
Main bearings:
Stage 1: 55 NM
Stage 2: 110 NM
Big end bearings:
Stage 1: 28 NM
Stage 2: 55 NM
Sump bolts:
Alloy sump: 25 NM
Steel sump: 10NM
Sump drain bolt: 25 NM
Flywheel/Driveplate: 110 NM
Clutch to flywheel: 26 NM
Crankshaft pully / damper: 125 NM
Camshaft sprocket / gear: 65 NM
Camshaft carrier / cap :25 NM
Camshaft / rocker cover 10 NM
Inlet manifold to cylinder head: 25 NM
Exhaust manifold to cylinder head: 45 NM
Spark plugs: 25 NM
Oxygen sensor (lambda) : 55 NM
Knock sensor: 12 NM
Front hub: 250 NM
Rear hub: 185 NM
Steering rack to rod end: 44 NM
Brake caliper carrier to hub FRONT : 110 NM
Brake caliper to carrier REAR : 27 NM
Brake caliper carrier to hub REAR: 39 NM
Road wheels: 110 NM
Hope this helps
