prelude 2.2 vtec engine 200bhp in rover 600 braking

veitchy · Post by **veitchy** » Sat Mar 29, 2008 4:47 pm

Giving up on one of my projects. New work commitments mean that i wont be able to give the car the attention it needs to finish it. The car is a rover 600 that has been fitted with a 2.2vtec prelude engine. This is a very rare conversion and i only know of a handful of these cars out there. At the moment i would prefer to sell the car in total but will break if there is enough interest. Engine starts and runs but throws up fault codes due to the previous owner trying to bolt a cheap turbo kit from ebay, basicly just wants all the turbo stuff removing or fitting properly. If anyone is interested in the car or engine please contact me

crafty_carper · Post by **crafty_carper** » Sat Mar 29, 2008 8:52 pm

price for the full car?

veitchy · Post by **veitchy** » Sun Mar 30, 2008 11:34 am

Looking for around £400. The car has std ti alloys, lowered, tinted windows, custom exhaust and 800 recaro seats. needs a std prelude manifold, ecu and a std head gasket because it has a thick cometic one fitted for the turbo. The current ecu is a p13 honda one with a 8psi turbo chip. any more info pm me

veitchy · Post by **veitchy** » Sun Mar 30, 2008 5:00 pm

Would be interested in a p/x for a 600 diesal

juliangungho · Post by **juliangungho** » Mon Mar 31, 2008 9:24 am

mate, I carnt beleive you gettin rid of it

tourer turbo · Post by **tourer turbo** » Mon Mar 31, 2008 5:29 pm

how was it getting the vitty recaros in mate?

veitchy · Post by **veitchy** » Mon Mar 31, 2008 8:22 pm

I know julian it really pains me to give it up but i am now working at a new spot that does alot of research and development so dont have the time to sort the car out. I really am gutted. more anoying is that i could now afford to have it sorted if there was a garage that would touch it. I dint put the vittie seats in so really dont know how hard they were to fit

veitchy · Post by **veitchy** » Fri Apr 04, 2008 7:46 pm

Nobody interested then

scott0583 · Post by **scott0583** » Fri Apr 04, 2008 8:03 pm

Hey very interested just cannot afford it.

That it sounds a really great conversion to do.

veitchy · Post by **veitchy** » Mon Apr 07, 2008 6:16 pm

guna go to breakers soon so open to offers. (gone by next monday)

jaguar82 · Post by **jaguar82** » Mon Apr 07, 2008 8:27 pm

If you will break it I am interested for lowering springs if you have some after market's?

juliangungho · Post by **juliangungho** » Wed Apr 09, 2008 8:41 am

veitcy, call me, I have sent you a pm.

jules